{"title":"Fyne Audio","description":"\u003cp\u003eFyne Audio, based in Scotland, designs loudspeakers for Hi-Fi and Home Cinema, including in-wall and in-ceiling models. Its distinctive feature is the IsoFlare coaxial driver: woofer and tweeter share the same centre, for point-source emission.\u003c\/p\u003e","products":[{"product_id":"fyne-audio-f1-5","title":"Fyne Audio F1-5","description":"\u003ch2\u003eFyne Audio F1-5: 2-way standmount loudspeaker with a 125 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F1-5 is the compact bookshelf model of the F1 range: it carries the technology of the bigger F1-8 over into a smaller enclosure. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eBuilt by hand, the cabinet rests on a compact plinth of machined aluminium, inside which sits the BassTrax diffuser for the low frequencies. The 125 mm IsoFlare unit, fitted with a FyneFlute rubber surround, works together with a compression tweeter that uses a 19 mm magnesium dome: the two form a time-aligned point source with isotropic radiation over the whole audio band. Every speaker is finished by hand at the Fyne Audio factory in the UK, with real walnut veneer and a burr walnut inlay.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 125 mm with a multi-fibre cone for bass and midrange and a FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 19 mm magnesium dome and a neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 48 Hz - 38 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 87 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 30 to 100 watts RMS\u003c\/li\u003e\n\u003cli\u003ePresence adjustment (from 2.5 to 5 kHz) of ±3 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, single wired and given Deep Cryogenic Treatment: second-order low-pass section, first-order high-pass section, crossover point at 1.9 kHz. Power handling is 50 watts RMS continuous and 200 watts peak. Dimensions (height x width x depth) are 321 x 186 x 289 mm and net weight is 5.7 kg: both figures refer to a single speaker. The official data sheet places the S-Trax position 38 mm from the front edge of the cabinet.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F1-5 is on sale in the Walnut Piano Gloss finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57109908685144,"sku":"5060546832300","price":4671.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f1-5-front-gappo.jpg?v=1791146458"},{"product_id":"fyne-audio-f1-8","title":"Fyne Audio F1-8","description":"\u003ch2\u003eFyne Audio F1-8: 2-way standmount loudspeaker with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F1-8 brings the technology used in the floorstanding models of the F1 range to a smaller, stand-mounted format. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eBuilt by hand, the cabinet rests on a plinth of machined aluminium, inside which sits the BassTrax diffuser for the low frequencies. The 200 mm IsoFlare unit, fitted with a FyneFlute rubber surround, is paired with a compression tweeter that uses a 25 mm magnesium dome: together they form a time-aligned point source with isotropic radiation over the whole audio band. Finishing is carried out by hand at the Fyne Audio factory in the UK, with real walnut veneer and a burr walnut inlay.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 200 mm with a multi-fibre cone for bass and midrange and a FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 25 mm magnesium dome and a ferrite magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 33 Hz - 34 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 30 to 180 watts RMS\u003c\/li\u003e\n\u003cli\u003ePresence adjustment (from 2.5 to 5 kHz) of ±3 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring and given Deep Cryogenic Treatment: second-order low-pass section, first-order high-pass section, crossover point at 1.8 kHz. Power handling is 90 watts RMS continuous and 360 watts peak. Dimensions (height x width x depth) are 470 x 280 x 441 mm and net weight is 15.2 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 69 mm and the SuperTrax position at 45 mm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F1-8 is on sale in the Walnut Piano Gloss finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57109930738008,"sku":"5060546832409","price":9190.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f1-8-front-kekld.jpg?v=1791146473"},{"product_id":"fyne-audio-f1-8s","title":"Fyne Audio F1-8S","description":"\u003ch2\u003eFyne Audio F1-8S: 2-way floorstanding loudspeaker with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F1-8S is the floorstander of the F1 range intended for smaller listening rooms: the development team led by Dr Paul Mills combined the 200 mm Fyne Audio driver with a purpose-designed crossover. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe cabinet has two cavities and a BassTrax port, and according to the data sheet the bass extends to 30 Hz. The IsoFlare unit incorporates a time-aligned compression tweeter with a 25 mm magnesium dome, whose high-frequency response goes beyond 34 kHz. Its high sensitivity makes it suitable for a broad choice of amplification, whether single-ended triode valve units or high-power solid-state models. Two potentiometers adjust high-frequency energy and presence, so that the output can be matched to the room and to the position of the speaker. Design, construction and hand finishing all take place at the Fyne Audio factory in the UK.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 200 mm with a FyneFlute surround and a multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 25 mm magnesium alloy dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 30 Hz - 34 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 200 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 1.8 to 34 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring and given Deep Cryogenic Treatment: second-order low-pass section, first-order high-pass section, crossover point at 1.8 kHz. Power handling is 100 watts RMS continuous and 400 watts peak. Dimensions (height x width x depth) are 1086 x 335 x 445 mm and net weight is 30 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 69 mm and the SuperTrax position at 45 mm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F1-8S is on sale in the Walnut Piano Gloss finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57109992997208,"sku":"5060546836001","price":14390.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f1-8s-front-ipnad.jpg?v=1791146486"},{"product_id":"fyne-audio-f502s","title":"Fyne Audio F502S","description":"\u003ch2\u003eFyne Audio F502S: 2.5-way floorstanding speakers with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F502S is the floorstander at the top of the Fyne Audio F500S Series. The maker suggests it for large rooms. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe 200 mm IsoFlare point source unit, whose tweeter has a 25 mm magnesium dome, is joined by a second 200 mm drive unit assigned to the bass and voiced to match it. The multi-fibre cone is held by a FyneFlute surround, which improves the response to transients. The patented BassTrax Tractrix diffuser, built into the cabinet, spreads bass evenly through 360 degrees. The cabinet is made of high-rigidity MDF, and a presence adjustment lets the listener set the midrange to taste.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system with a port firing downwards and BassTrax\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare unit for bass and midrange, with a compression tweeter using a 25 mm magnesium dome\u003c\/li\u003e\n\u003cli\u003e200 mm drive unit for the bass\u003c\/li\u003e\n\u003cli\u003ePresence adjustment: +\/- 3 dB between 2.5 and 5.0 kHz\u003c\/li\u003e\n\u003cli\u003eCabinet in high-rigidity MDF, extensively braced inside\u003c\/li\u003e\n\u003cli\u003eFrequency response 30 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 180 W RMS; the speaker takes 90 W RMS continuously. The crossover points sit at 250 Hz and 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 1112 x 300 x 382 mm (height x width x depth) and weighs 28.5 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F502S comes in three finishes: Natural Walnut and Black Oak, both in real wood veneer, and Black Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57109995389272,"sku":"5056386708424","price":2650.0,"currency_code":"EUR","in_stock":true},{"title":"Black Oak","offer_id":57109995422040,"sku":"5056386708417","price":2650.0,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":57109995356504,"sku":"5056386708400","price":2650.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f502s-black-piano-gloss-fcbjc.jpg?v=1791147169"},{"product_id":"fyne-audio-f1-10s","title":"Fyne Audio F1-10S","description":"\u003ch2\u003eFyne Audio F1-10S: 2-way floorstanding loudspeaker with a 250 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F1-10S is a floorstander in the F1 range, developed from the earlier F1-10: the team headed by Dr Paul Mills redesigned the crossover and updated the 250 mm IsoFlare driver with the FyneFlute surround. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe cabinet has two cavities and a BassTrax port, and according to the data sheet the bass extends to 26 Hz. The IsoFlare unit incorporates a time-aligned compression tweeter with a 75 mm titanium dome, whose high-frequency response goes beyond 26 kHz. Its very high sensitivity makes it suitable for a broad choice of amplification, whether single-ended triode valve units or high-power solid-state models. Two potentiometers adjust high-frequency energy and presence, so that the output can be matched to the room and to the position of the speaker. Design, construction and hand finishing all take place at the Fyne Audio factory in the UK.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 250 mm with a FyneFlute surround and a multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 75 mm titanium alloy dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 26 Hz - 26 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 94 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 280 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring and given Deep Cryogenic Treatment: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Power handling is 140 watts RMS continuous and 500 watts peak. Dimensions (height x width x depth) are 1191 x 405 x 581 mm and net weight is 57.7 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 108 mm and the SuperTrax position at 84 mm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F1-10S is on sale in the Walnut Piano Gloss finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57110021833048,"sku":"5060546836100","price":30590.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f1-10s-front-djcdn.jpg?v=1791146500"},{"product_id":"fyne-audio-f1-12s","title":"Fyne Audio F1-12S","description":"\u003ch2\u003eFyne Audio F1-12S: 2-way floorstanding loudspeaker with a 300 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F1-12S is the floorstander at the top of the Fyne Audio catalogue and the successor to the earlier F1-12. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eIts two-cavity cabinet stands on a machined aluminium plinth weighing 20 kg, inside which sits the BassTrax diffuser for the low frequencies. After years of research and development, the team headed by Dr Paul Mills redesigned the crossover and improved the 300 mm IsoFlare driver, fitted with a FyneFlute surround, to obtain more extended bass. The driver incorporates a time-aligned compression tweeter with a 75 mm titanium dome, whose high-frequency response goes beyond 26 kHz.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 300 mm with a FyneFlute surround and a multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 75 mm titanium dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 24 Hz - 26 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 96 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 350 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring and given Deep Cryogenic Treatment: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Power handling is 175 watts RMS continuous and 600 watts peak. Dimensions (height x width x depth) are 1350 x 450 x 680 mm and net weight is 72 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 133 mm and the SuperTrax position at 109 mm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F1-12S is on sale in the Walnut Piano Gloss finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57110054699352,"sku":"5060546836209","price":42290.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f1-12s-front-fafga.jpg?v=1791146514"},{"product_id":"fyne-audio-vintage-five","title":"Fyne Audio Vintage Five","description":"\u003ch2\u003eFyne Audio Vintage Five: 2-way standmount loudspeaker with a 125 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Vintage Five is the compact bookshelf model of the Vintage Series: it joins the cabinet work typical of traditional loudspeakers to the acoustic design of Dr Paul Mills. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eBuilt by hand, the enclosures are small enough to fit without difficulty into rooms of small and medium size. The Vintage Five uses the same solutions as the bigger models in the series: a 125 mm IsoFlare driver with a FyneFlute surround, the BassTrax system with its port firing downwards, and hand-assembled crossovers given Deep Cryogenic Treatment. The built-in Presence control lets the sound be adjusted to suit the listening room.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 125 mm with a multi-fibre cone for bass and midrange and a FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 19 mm magnesium dome and a neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 46 Hz - 38 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 87 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 30 to 100 watts RMS\u003c\/li\u003e\n\u003cli\u003ePresence adjustment (from 2.5 to 5 kHz) of ±3 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design with single-wire connection: second-order low-pass section, first-order high-pass section, crossover point at 1.9 kHz. Power handling is 50 watts RMS continuous and 200 watts peak. The cabinet is made of pressed birch ply of high density. Dimensions (height x width x depth) are 350 x 219 x 260 mm and net weight is 6.2 kg: both figures refer to a single speaker. The official data sheet places the S-Trax position 53 mm from the front edge of the cabinet.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe Vintage Five is on sale in the Walnut finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57110124069208,"sku":"5060546834106","price":4671.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-five-front-gmjcf.jpg?v=1791146528"},{"product_id":"fyne-audio-vintage-classic-gold-viii-sp","title":"Fyne Audio Vintage Classic Gold VIII SP","description":"\u003ch2\u003eFyne Audio Vintage Classic Gold VIII SP: 2-way floorstanding loudspeaker with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Vintage Classic Gold VIII SP is a 2-way floorstander that joins retro-inspired styling to the acoustic solutions of Fyne Audio. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eAccording to the manufacturer, the IsoFlare point source unit gives precise stereo imaging off-axis as well. The 200 mm multi-fibre cone for bass and midrange works with a tweeter that has a 25 mm magnesium dome and covers the band between 30 Hz and 34 kHz, while the BassTrax Tractrix diffuser is there to keep the bass under control. The cabinet is built by hand from birch ply.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way, two-cavity system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 200 mm with a multi-fibre cone for bass and midrange and a FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 25 mm magnesium dome and a ferrite magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 30 Hz - 34 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 30 to 200 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 1.8 to 34 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring and cryogenically treated in full: second-order low-pass section, first-order high-pass section, crossover point at 1.8 kHz. Continuous power handling is 100 watts RMS. The cabinet is made of high-density birch ply, stiffened by extensive bracing inside. Dimensions (height x width x depth) are 873 x 380 x 300 mm and net weight is 26.3 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 79 mm and the SuperTrax position at 55 mm.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57110249537880,"sku":"5056386709858","price":8540.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-gold-viii-sp-front-mmjmh.jpg?v=1791146597"},{"product_id":"fyne-audio-vintage-classic-viii-sm","title":"Fyne Audio Vintage Classic VIII SM","description":"\u003ch2\u003e2-way standmount loudspeaker with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eVintage Classic VIII SM is the standmount model of the Vintage Classic range: a compact loudspeaker that is simple to place in a room and recalls the look of traditional bookshelf designs. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe rectangular cabinet is finished by hand in walnut veneer, with a black baffle, gold trim and styling references to the 1970s. It is made of high-density fibreboard and braced internally. The 200 mm IsoFlare point source unit combines a multi-fibre cone for bass and midrange, held by a FyneFlute surround, with a compression tweeter using a 25 mm magnesium dome; the magnet is a ferrite type. The reflex port fires downwards onto the BassTrax Tractrix diffuser, in a version developed to work with the loudspeaker raised above the floor on stands.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing towards the floor and BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare point source unit with a 25 mm magnesium compression tweeter\u003c\/li\u003e\n\u003cli\u003eFrequency response of 34 Hz - 34 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 91 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 180 watt RMS; 90 watt RMS continuous, 360 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, with Cryo-Lite treatment\u003c\/li\u003e\n\u003cli\u003e±3 dB adjustments for high-frequency energy and for presence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover operates at 1.8 kHz, with a second-order low-pass and a first-order high-pass. The adjustments act between 1.8 and 34 kHz (high frequencies) and between 2.5 and 5 kHz (presence). The cabinet measures 540 x 330 x 294 mm (height x width x depth) and weighs 16.1 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 74 mm for S-Trax, 50 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is offered in the Walnut finish: walnut veneer combined with the black baffle and the gold trim.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57110440214872,"sku":"5060546835905","price":4040.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-viii-sm-front-iocal.jpg?v=1791146671"},{"product_id":"fyne-audio-vintage-classic-viii","title":"Fyne Audio Vintage Classic VIII","description":"\u003ch2\u003e2-way floorstanding loudspeaker with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eVintage Classic VIII is the floorstanding counterpart of the VIII SM model: a bigger cabinet, tall and narrow, intended to give a fuller sound. It belongs to the retro-styled Vintage Classic range. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe rectangular cabinet has walnut-veneered panels, gold anodised trim and analogue adjustment knobs fitted to their own panel, which shows the frequency response graphs. The structure is high-density fibreboard, braced internally; the grille is woven cloth. The 200 mm IsoFlare point source unit pairs a multi-fibre cone on a FyneFlute surround with a compression tweeter using a 25 mm magnesium dome, driven by a ferrite magnet. The reflex port fires downwards, with a twin cavity and a BassTrax Tractrix diffuser of reduced size, suited to a relatively compact cabinet.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing towards the floor, twin cavity and BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare point source unit with a 25 mm magnesium compression tweeter\u003c\/li\u003e\n\u003cli\u003eFrequency response of 30 Hz - 34 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 91 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 200 watt RMS; 100 watt RMS continuous, 400 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring; Cryo-Lite treatment\u003c\/li\u003e\n\u003cli\u003e±3 dB adjustments for high-frequency energy and for presence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover operates at 1.8 kHz, with a second-order low-pass and a first-order high-pass. The adjustments act between 1.8 and 34 kHz (high frequencies) and between 2.5 and 5 kHz (presence). The cabinet measures 873 x 380 x 300 mm (height x width x depth) and weighs 29.1 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 74 mm for S-Trax, 50 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is offered in the Walnut finish, with walnut-veneered panels and gold trim on the baffle.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57110467838296,"sku":"5060546835806","price":5210.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-viii-front-bfjkm.jpg?v=1791146690"},{"product_id":"fyne-audio-vintage-classic-x","title":"Fyne Audio Vintage Classic X","description":"\u003ch2\u003e2-way floorstanding loudspeaker with a 250 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eVintage Classic X is a 2-way floorstanding loudspeaker from the Vintage Classic range, with a high-volume cabinet and retro-inspired styling. It is meant for listeners who like the look of 1970s loudspeakers and expect present-day performance. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe rectangular cabinet has panels veneered in real wood, gold trim and a black baffle whose size keeps a traditional proportion to the driver diameter. The structure is high-density fibreboard with a walnut veneer, braced internally. The 250 mm IsoFlare point source unit pairs a multi-fibre cone for bass and midrange with a compression tweeter using a 75 mm titanium alloy dome; the magnet is a ferrite type. The reflex port fires downwards and works with the BassTrax Tractrix diffuser.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing towards the floor and BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e250 mm IsoFlare point source unit with a 75 mm compression tweeter in titanium alloy\u003c\/li\u003e\n\u003cli\u003eFrequency response of 28 Hz - 26 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 94 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 20 to 280 watt RMS; 140 watt RMS continuous, 560 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, with Cryo-Lite treatment\u003c\/li\u003e\n\u003cli\u003e±3 dB adjustments for high-frequency energy and for presence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover operates at 750 Hz, using second-order filters on both the low-pass and the high-pass side. The presence adjustment acts between 2.5 and 5 kHz. The cabinet measures 918 x 450 x 381 mm (height x width x depth) and weighs 45.2 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 106 mm for S-Trax, 82 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is offered in the Walnut finish, with a black baffle and gold trim.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57111484367192,"sku":"5060546835608","price":7550.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-x-front-mmoae.jpg?v=1791146709"},{"product_id":"fyne-audio-f57sp-6","title":"Fyne Audio F57SP-6","description":"\u003ch2\u003eFyne Audio F57SP-6: 2.5-way centre channel speaker built around a 150 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio F57SP-6 is a small centre channel speaker designed to sit alongside the smaller models of the F500SP and F700 ranges. It reproduces film dialogue and multichannel music. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eThe speaker uses a 150 mm IsoFlare point source unit made up of a multi-fibre cone, a FyneFlute surround, a 25 mm compression tweeter with magnesium dome, and a magnet in neodymium. Beside it sit a 150 mm bass driver and a passive radiator (ABR) of equal size, both fitted with multi-fibre cones and FyneFlute surrounds. The damping of the ABR can be adjusted between two settings: one for free-space placement and one for placement close to a boundary. The enclosure is pressed high-density MDF with internal bracing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system whose ABR has adjustable damping\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare driver with a 25 mm magnesium compression tweeter\u003c\/li\u003e\n\u003cli\u003e150 mm bass driver plus a 150 mm ABR\u003c\/li\u003e\n\u003cli\u003eFrequency response 47 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 180 W RMS\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover points are 250 Hz and 1.7 kHz, using a second-order low-pass section and a first-order high-pass section. Power handling is 80 W RMS continuous and 360 W peak. The speaker measures 210 x 600 x 250 mm (height x width x depth) and has a net weight of 15.2 kg.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe speaker is on sale in three finishes: Black Piano Gloss, White Piano Gloss and Walnut Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57111625400664,"sku":"5060546836315","price":1890.0,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":57111625466200,"sku":"5060546836322","price":1890.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut Piano Gloss","offer_id":57111625433432,"sku":"5060546836308","price":1890.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f57sp-6-black-piano-gloss-pkbgb.jpg?v=1791147300"},{"product_id":"fyne-audio-f701sp","title":"Fyne Audio F701SP","description":"\u003ch2\u003e2-way standmount loudspeaker with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eF701SP is a 2-way standmount loudspeaker from the F700SP range, built by hand in the United Kingdom. Fyne Audio suggests it for medium and large rooms. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eIts 200 mm IsoFlare driver derives from the one used in the F1-8 model and adopts a revised high-frequency waveguide for a smoother response. It is fitted in the standmount cabinet of the F701 model, completed here by trims in black anodised aluminium and by a matching plinth in black metal, on which the BassTrax low-frequency diffuser works. The crossover has been redesigned and optimised through computer modelling and long listening sessions: it uses high-quality Claritycap capacitors, Neotech PC-OCC wiring and WBT Nextgen 0703 terminals with gold plating, and undergoes the Deep Cryogenic Treatment.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing towards the floor and BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare point source unit: multi-fibre cone on a FyneFlute surround and a compression tweeter with a 25 mm magnesium dome, ferrite magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response of 35 Hz - 34 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 90 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 180 watt RMS; 90 watt RMS continuous, 360 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, at 1.8 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses a second-order low-pass and a first-order high-pass. The cabinet measures 465 x 278 x 393 mm (height x width x depth) and weighs 14 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 63 mm for S-Trax, 39 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eF701SP is offered in four finishes: Walnut Piano Gloss, Natural Walnut, Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57111643029848,"sku":"5060546836612","price":7990.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut Piano Gloss","offer_id":57111642964312,"sku":"5060546836605","price":7990.0,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":57111642997080,"sku":"5060546836636","price":7990.0,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":57111643062616,"sku":"5060546836629","price":7990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f701sp-black-piano-gloss-foakp.jpg?v=1791146785"},{"product_id":"fyne-audio-f57sp-8","title":"Fyne Audio F57SP-8","description":"\u003ch2\u003eFyne Audio F57SP-8: 2.5-way centre channel speaker built around a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio F57SP-8 is a centre channel speaker intended for the biggest home theatre and multichannel music set-ups. Fyne Audio names the F502SP floorstanders and the bigger models of the F700 Series as its natural partners. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eThe speaker uses a 200 mm IsoFlare point source unit made up of a multi-fibre cone, a FyneFlute surround, a 25 mm compression tweeter with magnesium dome, and a magnet in neodymium. Beside it sit a 200 mm bass driver and a passive radiator (ABR) of equal size, both fitted with multi-fibre cones and FyneFlute surrounds. The damping of the ABR can be adjusted between two settings: one for free-space placement and one for placement close to a boundary. The enclosure is pressed high-density MDF with internal bracing.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system whose ABR has adjustable damping\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare driver with a 25 mm magnesium compression tweeter\u003c\/li\u003e\n\u003cli\u003e200 mm bass driver plus a 200 mm ABR\u003c\/li\u003e\n\u003cli\u003eFrequency response 42 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 92 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 200 W RMS\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover points are 250 Hz and 1.7 kHz, using a second-order low-pass section and a first-order high-pass section. Power handling is 100 W RMS continuous and 400 W peak. The speaker measures 270 x 760 x 340 mm (height x width x depth) and has a net weight of 19.8 kg.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe speaker is on sale in three finishes: Black Piano Gloss, White Piano Gloss and Walnut Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57111960715608,"sku":"5060546836407","price":2690.0,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":57111960748376,"sku":"5060546836414","price":2690.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut Piano Gloss","offer_id":57111960781144,"sku":"5060546836421","price":2690.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f57sp-8-black-piano-gloss-holbb.jpg?v=1791147330"},{"product_id":"fyne-audio-f500sp-1","title":"Fyne Audio F500SP","description":"\u003ch2\u003eFyne Audio F500SP: 2-way standmount speakers with a 150 mm SP IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F500SP is the most compact speaker in the Special Production range, which is made in the UK. It descends from the F500 and gains a dedicated IsoFlare driver, a tuned crossover and the BassTrax port arrangement taken from the F700 range. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe 150 mm SP IsoFlare unit is a full-range point source. Its multi-fibre cone is driven by a motor with two magnets and carries a FyneFlute surround, which cuts cone resonances at the edge. Low frequencies leave through a port facing the floor and meet the BassTrax Tractrix diffuser. The bi-wire terminal panel includes a fifth post that grounds the driver chassis against radio-frequency interference. An anodised aluminium plinth and a diamond-cut aluminium trim around the driver complete the cabinet.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system; the port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare point source unit: multi-fibre cone for bass and midrange, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 25 mm magnesium dome and a neodymium magnet\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, bi-wirable and Cryo-Lite treated\u003c\/li\u003e\n\u003cli\u003eFrequency response 42 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 90 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 120 W RMS; the speaker takes 60 W RMS continuously. The crossover point sits at 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 323 x 200 x 320 mm (height x width x depth) and weighs 8.1 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F500SP comes in four finishes: Black Piano Gloss and White Piano Gloss, along with Walnut Piano Gloss and Natural Walnut.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57112868847960,"sku":"5060546833819","price":1865.0,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":57112868880728,"sku":"5060546833826","price":1865.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut Piano Gloss","offer_id":57112868913496,"sku":"5060546833802","price":1865.0,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":57112868946264,"sku":null,"price":1865.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f500sp-black-piano-gloss-ekmdp.jpg?v=1791147020"},{"product_id":"fyne-audio-f502sp","title":"Fyne Audio F502SP","description":"\u003ch2\u003eFyne Audio F502SP: 2.5-way floorstanding speakers with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F502SP is the SP edition of the F502 floorstander, made in the UK. It takes the 200 mm drive units of the F702 and houses them in a more compact cabinet. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eBoth the 200 mm IsoFlare unit and the 200 mm bass and midrange unit use rigid multi-fibre cones held by FyneFlute surrounds. The 25 mm magnesium compression tweeter inside the IsoFlare has a high-frequency wave guide formed in the pole piece. The F700 range also supplies the crossover components and the aluminium sandwich plinth with its Tractrix-profile BassTrax diffuser, redesigned to tune the F502SP cabinet. The aluminium chassis of the drivers has a diamond-cut finish.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system loaded by two cavities, with a port firing downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare point source unit: multi-fibre cone for bass and midrange, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 25 mm magnesium dome and a neodymium magnet\u003c\/li\u003e\n\u003cli\u003e200 mm woofer with multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, bi-wirable and Cryo-Lite treated\u003c\/li\u003e\n\u003cli\u003eFrequency response 30 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 92 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 200 W RMS; the speaker takes 100 W RMS continuously. The crossover points sit at 250 Hz and 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 1111 x 338 x 380 mm (height x width x depth) and weighs 30.4 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F502SP comes in four finishes: Black Piano Gloss and White Piano Gloss, along with Walnut Piano Gloss and Natural Walnut.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57113048187224,"sku":"5060546832515","price":5930.0,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":57113048219992,"sku":"5060546832522","price":5930.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut Piano Gloss","offer_id":57113048252760,"sku":"5060546832508","price":5930.0,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":57113048285528,"sku":null,"price":5930.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f502sp-black-piano-gloss-okked.jpg?v=1791147080"},{"product_id":"fyne-audio-f5e-lcr","title":"Fyne Audio F5E LCR","description":"\u003ch2\u003eFyne Audio F5E LCR: 2.5-way LCR speaker built around a 125 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio F5E LCR is a home theatre speaker that can serve as the left, centre or right channel. Fyne Audio presents it as a building block for a first home cinema system, with intelligible dialogue and involving effects. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eThe small cabinet holds a 125 mm IsoFlare point source unit, in which a multi-fibre cone covers bass and midrange and a 19 mm titanium-dome compression tweeter sits at its centre, together with a 125 mm bass driver and a passive radiator (ABR) of equal size. Built-in brackets allow the speaker to be fixed to a wall; alternatively it can simply stand on a surface.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system assisted by an auxiliary bass radiator (ABR)\u003c\/li\u003e\n\u003cli\u003e125 mm IsoFlare driver with a 19 mm titanium compression tweeter\u003c\/li\u003e\n\u003cli\u003e125 mm bass driver plus a 125 mm ABR\u003c\/li\u003e\n\u003cli\u003eFrequency response 65 Hz - 38 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 88 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 100 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover points are 350 Hz and 1.8 kHz, using a second-order low-pass section and a first-order high-pass section. Continuous power handling is 50 W RMS. The speaker measures 170 x 440 x 120 mm (height x width x depth) and has a net weight of 5.7 kg.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is vinyl-wrapped and is on sale in the Black Ash finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57113160679768,"sku":"5056386709209","price":370.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f5e-lcr-front-igbbl.jpg?v=1791147262"},{"product_id":"fyne-audio-f501sp-1","title":"Fyne Audio F501SP","description":"\u003ch2\u003eFyne Audio F501SP: 2.5-way floorstanding speakers with a 150 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F501SP is the Special Production edition of the F501 floorstander, made in the UK. It keeps the cabinet of the model it comes from and takes on engineering created for the F700 range. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe IsoFlare point source unit has a 150 mm multi-fibre cone for bass and midrange, held by a FyneFlute surround and matched to a compression tweeter whose magnesium dome measures 25 mm; a 150 mm woofer works beside it. The crossover has been revised, and the aluminium sandwich plinth adds stability while refining the BassTrax port that faces the floor. The terminal panel carries a fifth post that grounds the driver chassis and lowers the effect of radio-frequency interference. The aluminium chassis has diamond-cut detailing and the plinth is machined from anodised aluminium.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system loaded by two cavities, with a port firing downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare point source unit: multi-fibre cone for bass and midrange, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 25 mm magnesium dome and a neodymium magnet\u003c\/li\u003e\n\u003cli\u003e150 mm woofer with multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, bi-wirable and Cryo-Lite treated\u003c\/li\u003e\n\u003cli\u003eFrequency response 36 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 180 W RMS; the speaker takes 80 W RMS continuously. The crossover points sit at 250 Hz and 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 984 x 288 x 320 mm (height x width x depth) and weighs 21.0 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F501SP comes in four finishes: Black Piano Gloss and White Piano Gloss, along with Walnut Piano Gloss and Natural Walnut.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57113222840664,"sku":"5060546833901","price":4690.0,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":57113222873432,"sku":"5060546833925","price":4690.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut Piano Gloss","offer_id":57113222906200,"sku":"5060546833918","price":4690.0,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":57113222938968,"sku":null,"price":4690.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f501sp-black-piano-gloss-pgemp.jpg?v=1791147052"},{"product_id":"fyne-audio-f502e-lcr","title":"Fyne Audio F502E LCR","description":"\u003ch2\u003eFyne Audio F502E LCR: 2.5-way LCR speaker built around a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio F502E LCR is a home theatre speaker that can serve as the left, centre or right channel, and Fyne Audio recommends it for the bigger rooms. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eThe cabinet holds a 200 mm IsoFlare unit, in which a multi-fibre cone covers bass and midrange and a 25 mm titanium-dome compression tweeter sits at its centre, together with a 200 mm bass driver and a passive radiator (ABR) of equal size that is damped electromagnetically. The speaker can be fixed to a wall or simply stand on a surface.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system assisted by an auxiliary bass radiator (ABR)\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare driver with a 25 mm titanium compression tweeter\u003c\/li\u003e\n\u003cli\u003e200 mm bass driver plus a 200 mm ABR\u003c\/li\u003e\n\u003cli\u003eFrequency response 48 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 92 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 150 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover points are 250 Hz and 1.7 kHz, using a second-order low-pass section and a first-order high-pass section. Continuous power handling is 75 W RMS. The speaker measures 250 x 680 x 245 mm (height x width x depth) and has a net weight of 13.2 kg.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe cabinet is vinyl-wrapped and is on sale in the Black Ash finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":57113387270488,"sku":"5056386709407","price":770.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f502e-lcr-front-idhaa.jpg?v=1791147281"},{"product_id":"fyne-audio-f500s","title":"Fyne Audio F500S","description":"\u003ch2\u003eFyne Audio F500S: 2-way standmount speakers with a 150 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F500S is the bookshelf model of the Fyne Audio F500S Series, which adopts the latest development of the IsoFlare point source driver. The maker suggests it for music listening and for home cinema where space is limited. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe high-frequency section has a neodymium magnet, a vented chamber at the rear and a magnesium diaphragm: measures that cut resonance and carry the response past 30 kHz. The multi-fibre bass cone is held by a FyneFlute surround. The patented BassTrax system with Tractrix diffuser, built into the cabinet, spreads bass through 360 degrees and makes the speaker less sensitive to its position in the room. A presence switch on the back adjusts the soundstage by +\/- 3 dB between 2.5 and 5.0 kHz.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing downwards and BassTrax\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare unit for bass and midrange, with a compression tweeter using a 25 mm magnesium dome\u003c\/li\u003e\n\u003cli\u003ePresence adjustment: +\/- 3 dB between 2.5 and 5.0 kHz\u003c\/li\u003e\n\u003cli\u003eCabinet in high-rigidity MDF, extensively braced inside\u003c\/li\u003e\n\u003cli\u003eFrequency response 45 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 89 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 100 W RMS; the speaker takes 50 W RMS continuously. The crossover point sits at 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 325 x 204 x 317 mm (height x width x depth) and weighs 8.3 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F500S comes in three finishes: Black Oak and Natural Walnut, both in real wood veneer, and Black Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57117311664472,"sku":null,"price":889.0,"currency_code":"EUR","in_stock":false},{"title":"Black Oak","offer_id":57117311697240,"sku":"5056386708219","price":889.0,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":57117311730008,"sku":null,"price":889.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f500s-nero-lucido-qs91a.jpg?v=1791295154"},{"product_id":"fyne-audio-f501s","title":"Fyne Audio F501S","description":"\u003ch2\u003eFyne Audio F501S: 2.5-way floorstanding speakers with a 150 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F501S is a floorstander from the Fyne Audio F500S Series. The maker suggests it both for music listening and for home cinema. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe 150 mm IsoFlare point source unit, whose tweeter has a 25 mm magnesium dome, is joined by a 150 mm drive unit assigned to the bass. The patented BassTrax system with Tractrix diffuser, built into the cabinet, spreads bass evenly through 360 degrees and eases the problems of placing the speaker in the room. The cabinet is made of high-rigidity MDF, and a presence switch lets the listener adjust midrange detail.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system with a port firing downwards and BassTrax\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare unit for bass and midrange, with a compression tweeter using a 25 mm magnesium dome\u003c\/li\u003e\n\u003cli\u003e150 mm drive unit for the bass\u003c\/li\u003e\n\u003cli\u003ePresence adjustment: +\/- 3 dB between 2.5 and 5.0 kHz\u003c\/li\u003e\n\u003cli\u003eCabinet in high-rigidity MDF, extensively braced inside\u003c\/li\u003e\n\u003cli\u003eFrequency response 36 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 90 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 150 W RMS; the speaker takes 75 W RMS continuously. The crossover points sit at 250 Hz and 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 984 x 250 x 317 mm (height x width x depth) and weighs 18.6 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F501S comes in three finishes: Natural Walnut and Black Oak, both in real wood veneer, and Black Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57118010343768,"sku":null,"price":1865.0,"currency_code":"EUR","in_stock":false},{"title":"Black Oak","offer_id":57118010376536,"sku":null,"price":1865.0,"currency_code":"EUR","in_stock":false},{"title":"Natural Walnut","offer_id":57118010409304,"sku":"5056386708301","price":1865.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f501s-nero-lucido-qlhdv.jpg?v=1791294883"},{"product_id":"fyne-audio-f5e","title":"Fyne Audio F5E","description":"\u003ch2\u003eFyne Audio F5E: compact 2-way speakers with a 125 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F5E is the way into the technologies Fyne Audio uses throughout its catalogue. It is a compact speaker that may be fixed to a wall, set on a stand or kept on a bookshelf; the maker suggests it for rooms from small to medium. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe drive unit is a 125 mm IsoFlare point source design with a FyneFlute surround: a multi-fibre cone for bass and midrange matched to a compression tweeter whose titanium dome measures 19 mm. The port faces the floor and works with the BassTrax system, which makes the choice of position less critical and spreads sound evenly around the room.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing downwards and BassTrax\u003c\/li\u003e\n\u003cli\u003e125 mm IsoFlare unit with multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 19 mm titanium dome\u003c\/li\u003e\n\u003cli\u003eFrequency response 55 Hz - 38 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 87 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003ePlacement on a wall, a stand or a bookshelf\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 90 W RMS; the speaker takes 45 W RMS continuously. The crossover point sits at 1.8 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 270 x 174 x 228 mm (height x width x depth) and weighs 3.9 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F5E comes in two finishes: Walnut and Black Ash.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Ash","offer_id":57118886199640,"sku":"5056386709100","price":465.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut","offer_id":58646692561240,"sku":"5056386709018","price":465.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f5e-frassino-nero-rl8bg.webp?v=1791296434"},{"product_id":"fyne-audio-f501","title":"Fyne Audio F501E","description":"\u003ch2\u003eFyne Audio F501E: 2.5-way floorstanding speakers built around an IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio F501E is a floorstander with a small footprint, suited to medium-sized rooms and to both music listening and film soundtracks. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eEach cabinet carries a 150 mm IsoFlare point source unit, where a multi-fibre cone handles bass and midrange and a 25 mm titanium-dome compression tweeter sits at its centre, plus a second multi-fibre bass driver of equal diameter. The reflex port fires towards the floor and works with the BassTrax system which, according to Fyne Audio, spreads the sound evenly around the room so that positioning becomes less critical. The enclosure is made of MDF.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system, port firing downwards, BassTrax diffuser\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare driver with a 25 mm titanium compression tweeter\u003c\/li\u003e\n\u003cli\u003e150 mm bass driver, its cone also in multi-fibre\u003c\/li\u003e\n\u003cli\u003eFrequency response 36 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 90 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 150 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover points are 250 Hz and 1.7 kHz, using a second-order low-pass section and a first-order high-pass section. Continuous power handling is 75 W RMS. Each speaker measures 984 x 250 x 294 mm (height x width x depth) and weighs 17.8 kg: both figures refer to one speaker. The manufacturer's sheet also gives the mounting position for the S-Trax (44 mm from the front edge of the cabinet) and SuperTrax (20 mm) accessories.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eTwo finishes are on sale: Walnut and Black Ash.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Ash","offer_id":57120218317144,"sku":"5056386709308","price":1120.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut","offer_id":58646694265176,"sku":"5056386709315","price":1120.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f501e-frassino-nero-q9yq1.webp?v=1791294241"},{"product_id":"fyne-audio-f500s-lcr","title":"Fyne Audio F500S LCR","description":"\u003ch2\u003eFyne Audio F500S LCR: LCR speaker from the F500S Series\u003c\/h2\u003e\n\u003cp\u003eThe F500S LCR is the LCR-type speaker that belongs to the Fyne Audio F500S Series. It is sold individually: the selling unit is one single speaker.\u003c\/p\u003e\n\u003cp\u003eThree finishes are on sale: Natural Walnut, Black Piano Gloss and Black Oak.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":57120789430616,"sku":null,"price":565.0,"currency_code":"EUR","in_stock":false},{"title":"Black Oak","offer_id":57120789463384,"sku":null,"price":565.0,"currency_code":"EUR","in_stock":false},{"title":"Natural Walnut","offer_id":57120789496152,"sku":"5056386708509","price":565.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f500s-lcr-nero-lucido-ru2jk.webp?v=1791296898"},{"product_id":"fyne-audio-vintage-ten","title":"Fyne Audio Vintage Ten","description":"\u003ch2\u003eFyne Audio Vintage Ten: 2-way floorstanding loudspeaker with a 250 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Vintage Ten is a floorstander in the Vintage Series: it joins the cabinet work typical of traditional loudspeakers to the acoustic design of Dr Paul Mills. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eAlthough it remains a large cabinet, the Vintage Ten is built by hand with fairly slim proportions, so that it blends visually into listening rooms of small and medium size. It uses the same solutions as the bigger models in the series: a 250 mm IsoFlare driver with a FyneFlute surround, the BassTrax system with its port firing downwards, and hand-assembled crossovers given Deep Cryogenic Treatment. The Presence and HF Energy controls let the sound be adjusted to suit the room.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 250 mm with a multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 75 mm titanium alloy dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 26 Hz - 26 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 94 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 280 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Power handling is 140 watts RMS continuous and 560 watts peak. The cabinet is made of birch ply with oiled walnut, plus trim in solid walnut, stiffened by extensive bracing inside. Dimensions (height x width x depth) are 1040 x 468 x 489 mm and net weight is 54.6 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 124 mm and the SuperTrax position at 100 mm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe Vintage Ten is on sale in the Walnut finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646706782552,"sku":"5060546834205","price":20690.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-ten-front-hhigc.jpg?v=1791146547"},{"product_id":"fyne-audio-vintage-twelve","title":"Fyne Audio Vintage Twelve","description":"\u003ch2\u003eFyne Audio Vintage Twelve: 2-way floorstanding loudspeaker with a 300 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Vintage Twelve is a floorstander in the Vintage Series that carries the scale, the power and the precision of the F1-12S into the traditional styling of the series: according to Fyne Audio, the choice between the two models depends only on taste, traditional or contemporary. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe large cabinet is made of birch ply covered in natural wood veneers with a pronounced grain, with inlays of burr walnut and grilles framed in machined metal. It houses a 300 mm IsoFlare driver with a FyneFlute surround, crossovers given Deep Cryogenic Treatment and the Presence control fitted to the front panel: a fully analogue, lossless dial.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 300 mm with a multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 75 mm titanium alloy dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 24 Hz - 26 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 96 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 350 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Power handling is 175 watts RMS continuous and 700 watts peak. The cabinet is made of birch ply with oiled walnut, plus trim in solid walnut, stiffened by extensive bracing inside. Dimensions (height x width x depth) are 1102 x 572 x 591 mm and net weight is 77.1 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 163 mm and the SuperTrax position at 139 mm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe Vintage Twelve is on sale in the Walnut finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646707470680,"sku":"5060546834304","price":25190.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-twelve-front-ambpl.jpg?v=1791146565"},{"product_id":"fyne-audio-vintage-fifteen","title":"Fyne Audio Vintage Fifteen","description":"\u003ch2\u003eFyne Audio Vintage Fifteen: 2-way floorstanding loudspeaker with a 380 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Vintage Fifteen is the floorstander at the top of the Vintage Series and carries the largest IsoFlare driver Fyne Audio has made so far. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe point source system uses a 380 mm bass and midrange driver with a multi-fibre cone and a compression tweeter with a 75 mm titanium dome and a neodymium motor, fed by the highest-specification crossover in the Fyne Audio catalogue, given Deep Cryogenic Treatment. The very large cabinet has two cavities and a BassTrax port; it is made of birch ply, covered in walnut veneers with inlays of burr walnut and completed by machined metal parts.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 380 mm with a multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 75 mm titanium alloy dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 22 Hz - 26 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 97 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 400 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Power handling is 200 watts RMS continuous and 800 watts peak. The cabinet is made of birch ply with oiled walnut, plus trim in solid walnut, stiffened by extensive bracing inside. Dimensions (height x width x depth) are 1152 x 683 x 691 mm and net weight is 92.9 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 178 mm and the SuperTrax position at 154 mm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe Vintage Fifteen is on sale in the Walnut finish.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646708289880,"sku":"5060546834403","price":32390.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-fifteen-front-pbohi.jpg?v=1791146583"},{"product_id":"fyne-audio-vintage-classic-gold-x-sp","title":"Fyne Audio Vintage Classic Gold X SP","description":"\u003ch2\u003eFyne Audio Vintage Classic Gold X SP: 2-way floorstanding loudspeaker with a 250 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Vintage Classic Gold X SP is a 2-way floorstander built around a 250 mm IsoFlare driver with FyneFlute technology, intended to keep distortion low. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe cabinet is made of high-density birch ply braced on the inside, for stiffness and low resonance. The IsoFlare unit includes a magnet system in neodymium and a 75 mm titanium compression tweeter, for extended high frequencies and controlled bass. The classic styling of the series thus goes together with the latest acoustic solutions from Fyne Audio.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way, two-cavity system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 250 mm with a multi-fibre cone for bass and midrange and a FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 75 mm titanium alloy dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 28 Hz - 26 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 94 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 280 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring and given Deep Cryogenic Treatment: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Power handling is 140 watts RMS continuous and 560 watts peak. Dimensions (height x width x depth) are 918 x 450 x 381 mm and net weight is 43 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe BassTrax Tractrix diffuser spreads the bass evenly through 360 degrees and, according to the manufacturer, this makes the speaker simple to position in the room. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 110 mm and the SuperTrax position at 86 mm.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646709141848,"sku":"5056386709803","price":11240.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-gold-x-sp-front-gfhba.jpg?v=1791146616"},{"product_id":"fyne-audio-vintage-classic-gold-xii-sp","title":"Fyne Audio Vintage Classic Gold XII SP","description":"\u003ch2\u003eFyne Audio Vintage Classic Gold XII SP: 2-way floorstanding loudspeaker with a 300 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe Vintage Classic Gold XII SP is a 2-way floorstander with a 300 mm IsoFlare driver and FyneFlute surround; its sound takes its cue from the Vintage Series at the top of the Fyne Audio catalogue. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe cabinet, the largest of the Classic models, is made of high-density birch ply and uses the two-cavity BassTrax layout with a port firing downwards, in a retro-inspired design. According to the manufacturer, the 300 mm driver gives bass that goes deeper and a soundstage that is wider. The signature of Dr Paul Mills is engraved on the trim of the front control plate.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way, two-cavity system whose reflex port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003eIsoFlare point source driver of 300 mm with a multi-fibre cone for bass and midrange and a FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter with a 75 mm titanium alloy dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response 25 Hz - 26 kHz (-6 dB, typical in-room)\u003c\/li\u003e\n\u003cli\u003eSensitivity 96 dB (2.83 V at 1 m), nominal impedance 8 Ohm\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power from 20 to 350 watts RMS\u003c\/li\u003e\n\u003cli\u003eAdjustments of ±3 dB: high-frequency energy (from 750 Hz to 26 kHz) and Presence (from 2.5 to 5 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover is a low-loss passive design, ready for bi-wiring and given Deep Cryogenic Treatment: the low-pass and high-pass sections are both second order, with the crossover point at 750 Hz. Continuous power handling is 175 watts RMS. The cabinet is stiffened by extensive bracing inside. Dimensions (height x width x depth) are 948 x 550 x 421 mm and net weight is 51 kg: both figures refer to a single speaker. Measured from the front edge of the cabinet, the official data sheet places the S-Trax position at 136 mm and the SuperTrax position at 112 mm.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646709666136,"sku":"5056386709759","price":13940.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-gold-xii-sp-front-fgfjo.jpg?v=1791146634"},{"product_id":"fyne-audio-vintage-classic-gold-xv-sp","title":"Fyne Audio Vintage Classic Gold XV SP","description":"\u003ch2\u003e2-way floorstanding loudspeaker built around a 380 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eVintage Classic Gold XV SP is a 2-way floorstanding loudspeaker that Fyne Audio describes as the flagship of the Vintage Classic Gold SP range. It is aimed at listeners who want deep bass together with a wide soundstage. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe whole audio band is handled by one 380 mm IsoFlare point source unit: its bass and midrange cone uses multi-fibre material and a FyneFlute surround, while a compression tweeter with a 75 mm titanium dome sits at the centre, powered by a neodymium magnet. The large cabinet is built from birch plywood of high density and braced inside to keep resonances under control. The reflex port fires downwards, with twin-cavity loading and the BassTrax Tractrix diffuser. The trim carries gold accents and the signature of Dr. Paul Mills.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing towards the floor, twin cavity and BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e380 mm IsoFlare point source unit with a 75 mm titanium compression tweeter\u003c\/li\u003e\n\u003cli\u003eFrequency response of 23 Hz - 26 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 97 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 20 to 400 watt RMS, continuous handling of 200 watt RMS\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover ready for bi-wiring, with Deep Cryogenic Treatment\u003c\/li\u003e\n\u003cli\u003e±3 dB adjustments for high-frequency energy and for presence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover point is 750 Hz, using second-order filters on both the low-pass and the high-pass side. The two adjustments act between 750 Hz and 26 kHz (high frequencies) and between 2.5 and 5 kHz (presence). The cabinet measures 1052 x 650 x 537 mm (height x width x depth) and weighs 71 kg: size and weight refer to one loudspeaker.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe Fyne Audio data sheet also states where a super tweeter should sit relative to the cabinet: 142 mm back from its front edge for S-Trax and 118 mm for SuperTrax.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646711271768,"sku":"5056386709704","price":17000.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-gold-xv-sp-front-haglf.jpg?v=1791146653"},{"product_id":"fyne-audio-vintage-classic-xii","title":"Fyne Audio Vintage Classic XII","description":"\u003ch2\u003e2-way floorstanding loudspeaker with a 300 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eVintage Classic XII is a 2-way floorstanding loudspeaker from the Vintage Classic range. Its generous cabinet size recalls the big domestic loudspeakers of the 1970s; Fyne Audio suggests it for the largest rooms. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eOn the outside it shows a large rectangular cabinet, a walnut veneer and a black baffle with a strong visual presence. The structure is high-density fibreboard, braced internally. The 300 mm IsoFlare point source unit, fitted with a FyneFlute surround, pairs a multi-fibre cone for bass and midrange with a compression tweeter using a 75 mm titanium alloy dome; the magnet is a ferrite type. The reflex port fires downwards and works with the BassTrax Tractrix diffuser.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing towards the floor and BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e300 mm IsoFlare point source unit with a 75 mm compression tweeter in titanium alloy\u003c\/li\u003e\n\u003cli\u003eFrequency response of 25 Hz - 26 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 96 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 20 to 350 watt RMS; 175 watt RMS continuous, 700 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, with Cryo-Lite treatment\u003c\/li\u003e\n\u003cli\u003e±3 dB adjustments for high-frequency energy and for presence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover operates at 750 Hz, using second-order filters on both the low-pass and the high-pass side. The adjustments act between 750 Hz and 26 kHz (high frequencies) and between 2.5 and 5 kHz (presence). The cabinet measures 948 x 550 x 421 mm (height x width x depth) and weighs 54.5 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 130 mm for S-Trax, 106 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe loudspeaker is offered in the Walnut finish, with a walnut veneer and a black baffle.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646714810712,"sku":"5060546835707","price":9710.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-vintage-classic-xii-front-aldfb.jpg?v=1791146728"},{"product_id":"fyne-audio-supertrax","title":"Fyne Audio SuperTrax","description":"\u003ch2\u003eTime-aligned omnidirectional super tweeter to add to a pair of loudspeakers\u003c\/h2\u003e\n\u003cp\u003eSuperTrax is a Fyne Audio super tweeter placed alongside the main loudspeakers to stretch their frequency response far past the usual limits of human hearing. According to the manufacturer's data sheet, this upper extension brings more tonal fidelity, dynamic detail and sense of space, with an audible effect on the richness of low frequencies too. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eIts output is omnidirectional and aligned in time, so the energy reflected by the room agrees with the direct sound coming from the loudspeakers. The transducer is a 25 mm Thin Ply Carbon Diaphragm (TPCD) driven by a neodymium magnet. Fyne Audio compares its role to that of a subwoofer, but at the opposite end of the spectrum: it improves phase accuracy and preserves the harmonics of the music.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency response of 16 kHz - 60 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003e25 mm TPCD carbon diaphragm, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eThird-order high-pass filter at 16 kHz, with cryogenic treatment\u003c\/li\u003e\n\u003cli\u003eLevel adjustable by ±3 dB around the nominal setting\u003c\/li\u003e\n\u003cli\u003eIntended for loudspeakers with a sensitivity of up to 98 dB, in typical conditions\u003c\/li\u003e\n\u003cli\u003eNominal impedance of 8 ohm, amplifiers up to 400 watt RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eEach super tweeter measures 86 x 140 x 257 mm (height x width x depth, as listed in the official data sheet). The maximum suggested amplifier output is 400 watt RMS and the nominal impedance is 8 ohm.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eSuperTrax is offered in Black Piano Gloss and in Walnut, the latter matching the loudspeakers of the Vintage range. The Black Piano Gloss version has adjustable feet, which are an optional accessory for the Walnut version: they level the super tweeter when the loudspeaker has a sloping top panel, as in the F700 range.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Black Piano Gloss","offer_id":58646718218584,"sku":"5060546837503","price":3231.0,"currency_code":"EUR","in_stock":true},{"title":"Walnut","offer_id":58646721659224,"sku":"5060546836803","price":3771.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-supertrax-black-piano-gloss-hohcd.jpg?v=1791146747"},{"product_id":"fyne-audio-f702sp","title":"Fyne Audio F702SP","description":"\u003ch2\u003e2.5-way floorstanding loudspeaker with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eF702SP is a 2.5-way floorstanding loudspeaker from the F700SP range, built by hand in the United Kingdom. Fyne Audio suggests it for medium and large rooms. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eIts 200 mm IsoFlare driver derives from the one used in the F1-8 model and adopts a revised high-frequency waveguide for a smoother response; a second 200 mm unit for bass and midrange works beside it. The cabinet is that of the F702 model, tuned with a twin cavity and equipped with the BassTrax low-frequency diffuser. The crossover has been redesigned and optimised through computer modelling and long listening sessions: it uses high-quality Claritycap capacitors, Neotech PC-OCC wiring and WBT Nextgen 0703 terminals with gold plating, and undergoes a proprietary cryogenic treatment. The loudspeaker rests on a heavy aluminium platform with M12 threaded cones as supports.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system with a port firing towards the floor, BassTrax Tractrix diffuser and twin-cavity loading\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare point source unit: multi-fibre cone on a FyneFlute surround and a compression tweeter with a 25 mm magnesium dome, ferrite magnet\u003c\/li\u003e\n\u003cli\u003eSecond 200 mm unit with a multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eFrequency response of 28 Hz - 34 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 92 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 200 watt RMS; 100 watt RMS continuous, 400 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, at 250 Hz and 1.8 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses a second-order low-pass and a first-order high-pass. The cabinet is made of pressed birch plywood of high density, braced internally; it measures 1126 x 439 x 443 mm (height x width x depth) and weighs 37.5 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 63 mm for S-Trax, 39 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eF702SP is offered in four finishes: Walnut Piano Gloss, Natural Walnut, Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Walnut Piano Gloss","offer_id":58646729195864,"sku":"F702SP-WP","price":13040.9,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":58646731030872,"sku":"F702SP-WN","price":13040.9,"currency_code":"EUR","in_stock":true},{"title":"Black Piano Gloss","offer_id":58646731063640,"sku":"F702SP-BG","price":13040.9,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":58646731096408,"sku":"F702SP-WG","price":13040.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f702sp-walnut-piano-gloss-hlckm.jpg?v=1791146813"},{"product_id":"fyne-audio-f703sp","title":"Fyne Audio F703SP","description":"\u003ch2\u003e2.5-way floorstanding loudspeaker with a 250 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eF703SP is a 2.5-way floorstanding loudspeaker from the F700SP range: it evolves the F703 model and takes technical solutions from the F1 Series. It is built in Scotland. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eIts 250 mm IsoFlare point source unit is close to the one in the F1-10 model: it has a large neodymium magnet for the high frequencies and a 75 mm dome in titanium, giving lower distortion and a more even frequency response. A 250 mm woofer works beside it. The crossover has been redrawn and optimised through computer models and listening sessions: it uses Neotech PC-OCC wiring together with high-quality Claritycap capacitors, and receives a cryogenic treatment carried out in Fyne Audio's facilities. The terminals are WBT Nextgen 0703 types with gold plating. The loudspeaker is mounted on a heavy platform in machined aluminium, with M12 threaded cones as supports, for stability and precise bass.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system with a port firing towards the floor, BassTrax Tractrix diffuser and twin-cavity loading\u003c\/li\u003e\n\u003cli\u003e250 mm IsoFlare point source unit: multi-fibre cone on a FyneFlute surround and a compression tweeter with a 75 mm titanium dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003e250 mm woofer with a multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eFrequency response of 24 Hz - 26 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 94 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 250 watt RMS; 125 watt RMS continuous, 500 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, at 250 Hz and 850 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses a second-order low-pass and a first-order high-pass. The cabinet is made of pressed birch plywood of high density, braced internally; it measures 1195 x 505 x 468 mm (height x width x depth) and weighs 56 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 94 mm for S-Trax, 70 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eF703SP is offered in four finishes: Walnut Piano Gloss, Natural Walnut, Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Walnut Piano Gloss","offer_id":58646731260248,"sku":"5060546836704","price":16190.9,"currency_code":"EUR","in_stock":true},{"title":"Natural Walnut","offer_id":58646731293016,"sku":"5060546836735","price":16190.9,"currency_code":"EUR","in_stock":true},{"title":"Black Piano Gloss","offer_id":58646731325784,"sku":"5060546836711","price":16190.9,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":58646731358552,"sku":"5060546836728","price":16190.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f703sp-walnut-piano-gloss-feicl.jpg?v=1791146838"},{"product_id":"fyne-audio-f704sp","title":"Fyne Audio F704SP","description":"\u003ch2\u003e2.5-way floorstanding loudspeaker with a 300 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eF704SP is a 2.5-way floorstanding loudspeaker from the F700SP range; the letters SP stand for Special Production. It combines the layout of the F704 model with solutions taken from the F1 Series. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eIts 300 mm IsoFlare point source unit pairs a multi-fibre cone for bass and midrange with a compression tweeter using a 75 mm titanium dome, so that the two outputs are aligned in time. A second 300 mm woofer extends the response downwards, while the BassTrax system with its Tractrix diffuser spreads low frequencies through 360 degrees into the room. The crossover is an upgraded version with ClarityCap capacitors and Vishay resistors, and is cryogenically treated. The sandwich-type aluminium plinth derives from that of the F1-12S model: it keeps the cabinet stable and helps bass dispersion.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system with a port firing towards the floor, BassTrax Tractrix diffuser and twin-cavity loading\u003c\/li\u003e\n\u003cli\u003e300 mm IsoFlare point source unit: multi-fibre cone on a FyneFlute surround and a compression tweeter with a 75 mm titanium dome, neodymium magnet\u003c\/li\u003e\n\u003cli\u003e300 mm multi-fibre woofer on a FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eFrequency response of 22 Hz - 26 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 96 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 300 watt RMS, continuous handling of 150 watt RMS\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, at 250 Hz and 850 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover uses a second-order low-pass and a first-order high-pass. The cabinet is made of pressed birch plywood of high density, braced internally; it measures 1353 x 579 x 568 mm (height x width x depth) and weighs 71.5 kg: size and weight apply to one loudspeaker.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe Fyne Audio data sheet also states where a super tweeter should sit relative to the cabinet: 119 mm back from its front edge for S-Trax and 95 mm for SuperTrax.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646731391320,"sku":"F704SP","price":24990.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f704sp-front-gljoe.jpg?v=1791146863"},{"product_id":"fyne-audio-f700","title":"Fyne Audio F700","description":"\u003ch2\u003e2-way bookshelf loudspeaker with a 150 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eF700 is a compact 2-way loudspeaker from the F700 range, built in the United Kingdom with technology handed down from the F1 Series, the top line in the Fyne Audio catalogue. It is suggested for listeners who have little space available. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eIts 150 mm IsoFlare point source unit pairs a multi-fibre cone for bass and midrange, held by a FyneFlute surround, with a compression tweeter using a 25 mm magnesium dome; the magnet is a neodymium type. The reflex port fires downwards and incorporates the BassTrax low-frequency diffuser. The cabinets are made by hand and finished in a glossy piano-style lacquer.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system with a port firing towards the floor and BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare point source unit with a 25 mm magnesium compression tweeter, neodymium magnet\u003c\/li\u003e\n\u003cli\u003eFrequency response of 40 Hz - 34 kHz (-6 dB, typical in room)\u003c\/li\u003e\n\u003cli\u003eSensitivity of 89 dB (2.83 V at 1 m), nominal impedance of 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 150 watt RMS; 75 watt RMS continuous, 300 watt peak\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, ready for bi-wiring, with Cryo-Lite treatment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe crossover operates at 1.7 kHz, with a second-order low-pass and a first-order high-pass. The cabinet measures 348 x 224 x 337 mm (height x width x depth) and weighs 9 kg: size and weight apply to one loudspeaker. For anyone adding a super tweeter, the data sheet gives its distance from the cabinet's front edge: 46 mm for S-Trax, 22 mm for SuperTrax.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eF700 is offered in three lacquered finishes: Walnut Piano Gloss as well as Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Walnut Piano Gloss","offer_id":58646731653464,"sku":"5060546836902","price":3860.9,"currency_code":"EUR","in_stock":true},{"title":"Black Piano Gloss","offer_id":58646731915608,"sku":"5060546836919","price":3860.9,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":58646731948376,"sku":"5060546836926","price":3860.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f700-walnut-piano-gloss-djdij.jpg?v=1791146887"},{"product_id":"fyne-audio-f701","title":"Fyne Audio F701","description":"\u003ch2\u003eFyne Audio F701: 2-way standmount speakers built around a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F701 is the standmount model of the F700 range and is made in the UK. It borrows engineering first developed for the F1 Series and fits it into a compact cabinet meant to sit on a support; Fyne Audio names the FS8 stand as its partner. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe drive unit is a single 200 mm IsoFlare point source design, pairing a multi-fibre cone for bass and midrange with a compression tweeter whose magnesium dome measures 25 mm. The reflex port fires towards the floor and incorporates the BassTrax low-frequency diffuser with its Tractrix profile. Cabinets are made by hand and finished in gloss piano lacquer.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way system; the port fires downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare point source unit: multi-fibre cone for bass and midrange, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 25 mm magnesium dome and a neodymium magnet\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, bi-wirable and Cryo-Lite treated\u003c\/li\u003e\n\u003cli\u003eFrequency response 35 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 180 W RMS; the speaker takes 90 W RMS continuously and 360 W on peaks. The crossover point sits at 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 465 x 278 x 389 mm (height x width x depth) and weighs 13.6 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F701 comes in three lacquered finishes: Walnut Piano Gloss, plus Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Walnut Piano Gloss","offer_id":58646731981144,"sku":"5060546837008","price":5390.9,"currency_code":"EUR","in_stock":true},{"title":"Black Piano Gloss","offer_id":58646732439896,"sku":"5060546837015","price":5390.9,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":58646732472664,"sku":"5060546837022","price":5390.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f701-walnut-piano-gloss-gohpo.jpg?v=1791146916"},{"product_id":"fyne-audio-f702","title":"Fyne Audio F702","description":"\u003ch2\u003eFyne Audio F702: 2.5-way floorstanding speakers with a 200 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F702 is the mid-sized floorstander of the F700 range, bringing the latest Fyne Audio engineering together in a tower cabinet. The maker suggests it for rooms from medium to large. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe 200 mm IsoFlare point source unit is joined by a second 200 mm drive unit, fitted with a multi-fibre cone and assigned to the low frequencies. Both work inside a tuned cabinet with two cavities; the port faces the floor and incorporates the BassTrax diffuser for the low frequencies.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system loaded by two cavities, with a port firing downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare point source unit: multi-fibre cone for bass and midrange, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 25 mm magnesium dome and a neodymium magnet\u003c\/li\u003e\n\u003cli\u003eSecond 200 mm drive unit with multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, bi-wirable and Cryo-Lite treated\u003c\/li\u003e\n\u003cli\u003eFrequency response 30 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 92 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 200 W RMS; the speaker takes 100 W RMS continuously. The crossover points sit at 250 Hz and 1.7 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 1111 x 384 x 439 mm (height x width x depth) and weighs 30.5 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F702 comes in three lacquered finishes: Walnut Piano Gloss, plus Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Walnut Piano Gloss","offer_id":58646732636504,"sku":"5060546837107","price":9890.9,"currency_code":"EUR","in_stock":true},{"title":"Black Piano Gloss","offer_id":58646733717848,"sku":"5060546837114","price":9890.9,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":58646733750616,"sku":"5060546837121","price":9890.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f702-walnut-piano-gloss-gnhai.jpg?v=1791146943"},{"product_id":"fyne-audio-f703","title":"Fyne Audio F703","description":"\u003ch2\u003eFyne Audio F703: 2.5-way floorstanding speakers with a 250 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F703 is a floorstander from the F700 range and is made in the UK. It borrows engineering first developed for the F1 Series and applies it to a tower cabinet carrying 250 mm drive units. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe 250 mm IsoFlare point source unit is joined by a 250 mm woofer fitted with a multi-fibre cone. Both work inside a tuned cabinet with two cavities; the port faces the floor and incorporates the BassTrax diffuser for the low frequencies.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system loaded by two cavities, with a port firing downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e250 mm IsoFlare point source unit: multi-fibre cone for bass and midrange, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 75 mm titanium dome and a ferrite magnet\u003c\/li\u003e\n\u003cli\u003e250 mm woofer with multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, bi-wirable and Cryo-Lite treated\u003c\/li\u003e\n\u003cli\u003eFrequency response 26 Hz - 26 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 94 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 20 to 250 W RMS; the speaker takes 125 W RMS continuously. The crossover points sit at 200 Hz and 850 Hz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 1180 x 438 x 464 mm (height x width x depth) and weighs 48.3 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F703 comes in three lacquered finishes: Walnut Piano Gloss, plus Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Walnut Piano Gloss","offer_id":58646734012760,"sku":"5060546837206","price":12590.9,"currency_code":"EUR","in_stock":true},{"title":"Black Piano Gloss","offer_id":58646734766424,"sku":"5060546837213","price":12590.9,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":58646734799192,"sku":"5060546837220","price":12590.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f703-walnut-piano-gloss-dfllo.jpg?v=1791146966"},{"product_id":"fyne-audio-f704","title":"Fyne Audio F704","description":"\u003ch2\u003eFyne Audio F704: 2.5-way floorstanding speakers with a 300 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F704 sits at the top of the F700 range: a floorstander made in the UK that borrows engineering first developed for the F1 Series. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe 300 mm IsoFlare point source unit is joined by a 300 mm woofer fitted with a multi-fibre cone. Both work inside a tuned cabinet with two cavities; the port faces the floor and incorporates the BassTrax diffuser for the low frequencies. The cabinet is veneered and finished in gloss piano lacquer.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system loaded by two cavities, with a port firing downwards onto a BassTrax Tractrix diffuser\u003c\/li\u003e\n\u003cli\u003e300 mm IsoFlare point source unit: multi-fibre cone for bass and midrange, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 75 mm titanium dome and a ferrite magnet\u003c\/li\u003e\n\u003cli\u003e300 mm woofer with multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003eLow-loss passive crossover, bi-wirable and Cryo-Lite treated\u003c\/li\u003e\n\u003cli\u003eFrequency response 24 Hz - 26 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 96 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 20 to 300 W RMS; the speaker takes 150 W RMS continuously and 600 W on peaks. The crossover points sit at 200 Hz and 900 Hz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 1339 x 540 x 561 mm (height x width x depth) and weighs 67.7 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eFinishes\u003c\/h3\u003e\n\u003cp\u003eThe F704 comes in three lacquered finishes: Walnut Piano Gloss, plus Black Piano Gloss and White Piano Gloss.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Walnut Piano Gloss","offer_id":58646734963032,"sku":"5060546837305","price":16190.9,"currency_code":"EUR","in_stock":true},{"title":"Black Piano Gloss","offer_id":58646735225176,"sku":"5060546837312","price":16190.9,"currency_code":"EUR","in_stock":true},{"title":"White Piano Gloss","offer_id":58646735257944,"sku":"5060546837329","price":16190.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f704-walnut-piano-gloss-nhojl.jpg?v=1791146993"},{"product_id":"fyne-audio-f55e","title":"Fyne Audio F55E","description":"\u003ch2\u003eFyne Audio F55E: 2.5-way floorstanding speakers with a 125 mm IsoFlare driver\u003c\/h2\u003e\n\u003cp\u003eThe F55E is a 2.5-way floorstander with a small footprint, which Fyne Audio suggests for small rooms and for listening to both music and films. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe 125 mm IsoFlare point source unit matches a multi-fibre cone for bass and midrange to a compression tweeter whose titanium dome measures 19 mm; a second 125 mm multi-fibre drive unit assigned to the bass works beside it. The port faces the floor and works with the BassTrax system. The cabinet is made of MDF.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2.5-way system with a port firing downwards and BassTrax\u003c\/li\u003e\n\u003cli\u003e125 mm IsoFlare unit with multi-fibre cone for bass and midrange\u003c\/li\u003e\n\u003cli\u003eCompression tweeter using a 19 mm titanium dome\u003c\/li\u003e\n\u003cli\u003e125 mm drive unit for the bass, with multi-fibre cone\u003c\/li\u003e\n\u003cli\u003eFrequency response 42 Hz - 38 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 88 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eSuggested amplifier power runs from 30 to 120 W RMS; the speaker takes 60 W RMS continuously. The crossover points sit at 350 Hz and 1.8 kHz, using a second-order low-pass filter and a first-order high-pass filter. Each cabinet measures 925 x 210 x 236 mm (height x width x depth) and weighs 11.9 kg: both figures refer to a single speaker.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eBassTrax technology spreads sound evenly around the room, which is why the position of the speakers is less critical.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646736273752,"sku":"F55E","price":1035.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-f55e-front-bmhof.jpg?v=1791147218"},{"product_id":"fyne-audio-fa301ic","title":"Fyne Audio FA301iC","description":"\u003ch2\u003eFyne Audio FA301iC: 2-way coaxial speaker for flush mounting in ceilings or walls\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio FA301iC is a small full-range speaker intended for concealed installation in the home, either in a ceiling or in a wall. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eIt takes its drive units from the F300 Series speakers: a 150 mm multi-fibre cone for bass and midrange, held by a FyneFlute surround, and a 25 mm polyester-dome tweeter placed coaxially. The tweeter sits in a pod that can be swivelled, so the high frequencies can be aimed at the listening seat. The crossover is voiced for built-in use; quick-fit clamps hold the speaker in place and the round grille has a low profile.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way coaxial system with a steerable tweeter\u003c\/li\u003e\n\u003cli\u003e150 mm cone in multi-fibre, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003e25 mm coaxial tweeter with polyester dome\u003c\/li\u003e\n\u003cli\u003eFrequency response 44 Hz - 28 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 89 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 25 to 100 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe passive crossover point is 3.2 kHz, using a second-order low-pass section and a first-order high-pass section. Power handling is 50 W RMS continuous and 200 W peak. The speaker measures 224 mm in diameter by 95 mm in depth and has a net weight of 2 kg.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe cut-out is 208 mm in diameter and the speaker takes up 92 mm of depth behind the mounting surface. The clamps travel from 5 to 50 mm and the suggested minimum volume behind the speaker is 10 litres. The round grille is 232 mm across; the square grille, 233 x 233 mm, is an optional accessory.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646736306520,"sku":"5060546832706","price":175.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fa301ic-front-bdlan.jpg?v=1791147350"},{"product_id":"fyne-audio-fa302ic","title":"Fyne Audio FA302iC","description":"\u003ch2\u003eFyne Audio FA302iC: 2-way coaxial speaker for flush mounting in ceilings or walls\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio FA302iC is a speaker for concealed installation in the home, either in a ceiling or in a wall, with a 200 mm drive unit and bass that reaches under 40 Hz. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eIt derives from the bigger models of the F300 range: a 200 mm multi-fibre cone for bass and midrange, held by a FyneFlute surround, and a 25 mm soft polyester-dome tweeter placed coaxially. The tweeter pod can be swivelled so the sound is aimed at the listening seat. The crossover is voiced for a ceiling or wall position. The round magnetic grille has a low profile, lies nearly flush with the surface and accepts paint.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way coaxial system with a steerable tweeter\u003c\/li\u003e\n\u003cli\u003e200 mm cone in multi-fibre, FyneFlute surround\u003c\/li\u003e\n\u003cli\u003e25 mm coaxial tweeter with polyester dome\u003c\/li\u003e\n\u003cli\u003eFrequency response 37 Hz - 28 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 90 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 25 to 120 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe passive crossover point is 2.8 kHz, using a second-order low-pass section and a first-order high-pass section. Power handling is 60 W RMS continuous and 240 W peak. The speaker measures 273 mm in diameter by 115 mm in depth and has a net weight of 2.1 kg.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eFitting relies on quick-fit clamps, sprung cable terminals and a template for the cut-out. The cut-out is 248 mm in diameter and the speaker takes up 112.5 mm of depth behind the mounting surface. The clamps travel from 5 to 50 mm and the suggested minimum volume is 15 litres. The round grille is 281 mm across; the square grille, 281 x 281 mm, is an optional accessory.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646736339288,"sku":"5060546832805","price":237.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fa302ic-front-fnlem.jpg?v=1791147369"},{"product_id":"fyne-audio-fa501ic","title":"Fyne Audio FA501iC","description":"\u003ch2\u003eFyne Audio FA501iC: 2-way IsoFlare speaker for flush mounting in ceilings or walls\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio FA501iC is a small speaker for concealed installation in the home, either in a ceiling or in a wall, which carries the technology of the F500 range over to this format. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eIt is built on the 150 mm IsoFlare point source unit: the 25 mm titanium-dome compression tweeter is placed at the centre of the multi-fibre cone that handles bass and midrange, and that cone is held by a FyneFlute surround. The crossover is voiced for flush fitting in an infinite-baffle arrangement. Depth stays below 100 mm. Quick-fit clamps are included, along with two low-profile grilles, one round and one square, both of which accept paint.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way IsoFlare system for ceilings or walls\u003c\/li\u003e\n\u003cli\u003e150 mm IsoFlare driver with multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003e25 mm compression tweeter with titanium dome\u003c\/li\u003e\n\u003cli\u003eFrequency response 40 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 89 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 125 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe passive crossover point is 1.7 kHz, using a second-order low-pass section and a first-order high-pass section. Power handling is 62.5 W RMS continuous and 250 W peak. The speaker measures 224 mm in diameter by 101 mm in depth and has a net weight of 2.3 kg.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe cut-out is 208 mm in diameter and the speaker takes up 99 mm of depth behind the mounting surface. The clamps travel from 5 to 50 mm and the suggested minimum volume behind the speaker is 12 litres. The round grille is 232 mm across, while the square one measures 233 x 233 mm.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646736503128,"sku":"5060546832904","price":237.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fa501ic-front-kifdo.jpg?v=1791147387"},{"product_id":"fyne-audio-fa502ic","title":"Fyne Audio FA502iC","description":"\u003ch2\u003eFyne Audio FA502iC: 2-way IsoFlare speaker for flush mounting in ceilings or walls\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio FA502iC is a speaker for concealed installation in the home, either in a ceiling or in a wall, which carries the performance of the F500 range over to this format. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eIt is built on the 200 mm IsoFlare point source unit of the F500 range, made up of a multi-fibre cone for bass and midrange, a FyneFlute surround and a 25 mm titanium-dome compression tweeter. The crossover is voiced for infinite-baffle operation. For this design Fyne Audio states high efficiency, generous power handling and an isotropic 360-degree dispersion across the whole range. The chassis has self-aligning clamps and sprung terminals for the cables.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way IsoFlare system for ceilings or walls\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare driver with multi-fibre cone and FyneFlute surround\u003c\/li\u003e\n\u003cli\u003e25 mm compression tweeter with titanium dome\u003c\/li\u003e\n\u003cli\u003eFrequency response 35 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 150 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe passive crossover point is 1.7 kHz, using a second-order low-pass section and a first-order high-pass section. Power handling is 75 W RMS continuous and 300 W peak. The speaker measures 273 mm in diameter by 123 mm in depth and has a net weight of 2.5 kg.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe cut-out is 248 mm in diameter and the speaker takes up 120.5 mm of depth behind the mounting surface. The clamps travel from 5 to 50 mm and the suggested minimum volume is 18 litres. Two low-profile magnetic grilles are supplied, both paintable and backed by an acoustic cloth: a round one 281 mm across and a square one of 281 x 281 mm.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646736535896,"sku":"5060546833000","price":283.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fa502ic-front-higml.jpg?v=1791147405"},{"product_id":"fyne-audio-fa502ic-lcr","title":"Fyne Audio FA502iC LCR","description":"\u003ch2\u003eFyne Audio FA502iC LCR: 2-way flush-mount IsoFlare speaker with an angled driver for LCR channels\u003c\/h2\u003e\n\u003cp\u003eThe Fyne Audio FA502iC LCR is the LCR variant of the FA502iC: it is meant for ceiling or wall installations in the home where the speaker is not in line with the listening seat, and for the three front channels (left, centre, right) in a home theatre system. It is sold singly.\u003c\/p\u003e\n\u003cp\u003eThe 200 mm IsoFlare point source unit, made up of a multi-fibre cone for bass and midrange, a FyneFlute surround and a 25 mm titanium-dome compression tweeter, is tilted by 15 degrees relative to the mounting surface. Turning the speaker inside its round cut-out aims the output at the main listening seat. Fitting, power and performance are, according to Fyne Audio, those of the standard FA502iC.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-way IsoFlare system with angled dispersion for LCR use\u003c\/li\u003e\n\u003cli\u003e200 mm IsoFlare driver tilted by 15 degrees\u003c\/li\u003e\n\u003cli\u003e25 mm compression tweeter with titanium dome\u003c\/li\u003e\n\u003cli\u003eFrequency response 35 Hz - 34 kHz (-6 dB, typical in-room figure)\u003c\/li\u003e\n\u003cli\u003eSensitivity 91 dB (2.83 V at 1 m), nominal impedance 8 ohm\u003c\/li\u003e\n\u003cli\u003eSuggested amplifier output from 30 to 150 W RMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003eThe passive crossover point is 1.7 kHz, using a second-order low-pass section and a first-order high-pass section. Power handling is 75 W RMS continuous and 300 W peak. The speaker measures 278 mm in diameter by 157 mm in depth and has a net weight of 2.4 kg.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe cut-out is 255 mm in diameter and the speaker takes up 155 mm of depth behind the mounting surface. The clamps travel from 0 to 26 mm and the suggested minimum volume is 18 litres. A round low-profile grille that accepts paint, 288 mm across, is supplied; no square grille is offered for this model.\u003c\/p\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646737092952,"sku":"5060546833109","price":327.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fa502ic-lcr-front-obhlh.jpg?v=1791147424"},{"product_id":"fyne-audio-fs5-stand","title":"Fyne Audio FS5 Stand","description":"\u003ch2\u003eFyne Audio FS5 Stand: steel and aluminium stands for speakers with a wide base\u003c\/h2\u003e\n\u003cp\u003eThe FS5 Stand is a UK-built support for speakers that need a large resting area; the F57-8 centre channel is among the models it is intended for. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe top plate is 5 mm steel, cut by laser. Its four cylindrical steel columns can be filled to add mass and improve damping. The aluminium base integrates spikes adjustable from above, knurled locking rings and machined aluminium cups, so the stand can rest on carpet as well as on hard floors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight without spikes: 420 mm\u003c\/li\u003e\n\u003cli\u003eTop plate: 325 x 255 mm\u003c\/li\u003e\n\u003cli\u003eBase: 400 x 305 mm (width x depth)\u003c\/li\u003e\n\u003cli\u003eNet weight: 11.0 kg for one stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646737125720,"sku":"5060546834557","price":584.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fs5-stand-front-hnjfd.jpg?v=1791147441"},{"product_id":"fyne-audio-fs6-stand","title":"Fyne Audio FS6 Stand","description":"\u003ch2\u003eFyne Audio FS6 Stand: stands for the F500SP and for other compact speakers\u003c\/h2\u003e\n\u003cp\u003eThe FS6 Stand is a support developed for the F500SP speakers. Its steel top plate is sized on that model, yet it is broad enough to accept other compact standmount speakers too. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe shaped central column is an aluminium extrusion and can be filled to add mass and improve damping. The aluminium-plate plinth borrows its look from the F500 SP floorstanders and integrates spikes adjustable from above, knurled locking rings and machined aluminium cups that keep hard floors from being marked.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight without spikes: 611 mm\u003c\/li\u003e\n\u003cli\u003eTop plate: 160 x 230 mm\u003c\/li\u003e\n\u003cli\u003eBase: 277 x 350 mm (width x depth)\u003c\/li\u003e\n\u003cli\u003eNet weight: 6.5 kg for one stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646737158488,"sku":"5060546834502","price":669.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fs6-stand-front-lemck.jpg?v=1791147455"},{"product_id":"fyne-audio-fs8-stand","title":"Fyne Audio FS8 Stand","description":"\u003ch2\u003eFyne Audio FS8 Stand: steel and aluminium stands for three models: F700, F701, F1-8\u003c\/h2\u003e\n\u003cp\u003eThe FS8 Stand is a rigid, UK-built support for Fyne Audio standmount speakers. It attaches to three models (F700, F701, F1-8) through dedicated fixing points and bolts; adding the optional adaptor plate and the matching putty makes it suitable for the F1-5 too. Sold as a pair.\u003c\/p\u003e\n\u003cp\u003eThe top plate is steel; the shaped aluminium central column can be filled to add mass and hides a route for the cables. The plinth, machined from aluminium, consists of two 8 mm plates kept apart by spacers that house the spikes, each locked by a large knurled ring. Machined aluminium cups are included so that wooden floors are not marked.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeight without spikes: 644 mm\u003c\/li\u003e\n\u003cli\u003eTop plate: 250 x 160 mm\u003c\/li\u003e\n\u003cli\u003eBase: 348 x 400 mm (width x depth)\u003c\/li\u003e\n\u003cli\u003eNet weight: 9.8 kg for one stand\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fyne Audio","offers":[{"title":"Default Title","offer_id":58646737355096,"sku":"5060546831907","price":1250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/fyne-audio-fs8-stand-front-felab.jpg?v=1791147475"}],"url":"https:\/\/videosell.de\/collections\/fyne-audio.oembed?page=2","provider":"Videosell store","version":"1.0","type":"link"}