The Michi S5 stereo amplifier delivers 500 watts per channel into 8 ohm loads with best-in-class performance. The dual mono construction makes use of oversized independent toroidal transformers for the two channels, produced in-house, which ensure an exceptional low-end with maximum control and precision of every detail, all in a new, elegant design.
Output power 2 x 500 watts
Class AB amplification
British made filter capacitors
Oversized power supply with double toroidal transformer
Balanced inputs with XLR
Continuous power output
500watts per channel (8ohm)
800watts per channel (4ohm)
total harmonic distortion)
<0.008%
Frequency response
20Hz - 20kHz (+0dB, -0.15dB)
10Hz - 100kHz (+0dB, -0.4dB)
S/N Ratio (A-weighted IHF)
120dB
I earn
Unbalanced inputs (RCA): 28dB
Balanced Inputs (XLR): 24dB
BTU (4ohm, at 1/8th power)
3450 BTU/hr
|
Dimensions (W x H x D)
485×238×465mm 19" × 9.375" × 18.25"
Front panel height
220mm
Diet
230V, 50Hz
Absorption
1200W
Standby absorption
Normal: <0.5W
Network Enabled: <2W
Net weight
59.9kg
|
The Michi S5 stereo power amplifier is the best Class AB linear amplifier in its class, capable of delivering 500 watts into 8 ohms and over 800 watts into 4 ohm loads. The dual mono construction features independent oversized 2200 VA toroidal transformers for the two channels, manufactured in-house and enclosed in individual epoxy filled enclosures to eliminate noise and vibration. A group of 4 British-made filter capacitors of 188,000uF total ensure an exceptional low-end with maximum control and precision of every detail, while 32 high-current devices in the output stages ensure smooth power delivery in the conditions load more difficult.
Excellent audio performances are obtained by accompanying a careful project to a meticulous development. This is demonstrated by the S5 preamplifier, where countless hours of design, testing, critical evaluation of the most important components have resulted in accuracy and reproduction fidelity worthy of the Michi trademark.
An elegant design characterizes this amplifier equipped with front color display and exclusive double rhodium plated high current output terminals. The supplied remote control allows easy configuration and control of the amplifier, while the RS232 and Ethernet interfaces facilitate integration with all the most common automation systems.
Intermodulation Distortion (60Hz:7kHz, 4:1)
<0.03%
Damping factor
350
Speaker impedance
minimum 4 ohms
|
Input sensitivity
Unbalanced inputs (RCA): 2.6V
Balanced inputs (XLR): 4.2V
Impedance input
Unbalanced Inputs (RCA): 12.5kohm
Balanced Inputs (XLR): 100kohm
Channel Separation / Crosstalk
>65dB
|