2 x 10 W network amplifier with Dante audio input
The NPA20DA is a compact power amplifier that takes its audio straight from the Dante network and drives the loudspeakers of a room, in both commercial and residential projects.
It delivers 2 x 10 W in stereo or 20 W in mono into 4 or 8 ohm loads. Power comes over PoE+ through the same network port that carries the signal, or from a local adapter purchased separately; when the switch offers less power, the output level can be scaled down to match. The internal DSP provides a 31-band equaliser plus adjustable delay to keep sound aligned with the picture. Control is available from the front panel, over RS-232, TCP/IP, a web page or a 12 V trigger.
Key features
- Two-channel Dante / AES67 input
- Output of 2 x 10 W or 1 x 20 W, at 4 or 8 ohm
- PoE+ power from the Dante link or an external adapter
- 31-band equaliser (+3 / -10 dB) and audio delay
- 0 V / 5-12 V trigger input for automatic power-up
- Automatic standby when no signal is present
- Operation from the front panel, over RS-232 or via IP
Connections
The unit provides an RJ45 port for Dante audio, a 4-pin Phoenix terminal for the speakers, a 3-pin one for RS-232 and a 2-pin one for the trigger. The optional adapter is rated 24 V 1.25 A with a 4-pin DIN plug; otherwise a PoE+ Type 2, Class 4 switch is enough. The housing measures 112 x 144 x 22 mm and weighs about 1 kg packed.