JBL Studio 610

JBL Studio 610: 2-way sealed loudspeaker for wall mounting

The Studio 610 is the model of the Studio 6 range meant to hang on the wall, intended for the surround channels of a multichannel system. Sold as a pair. Its cabinet is sealed, with no reflex port, and it suits amplifiers of up to 100 W.

The cabinet holds a 133 mm woofer with a PolyPlas cone and, for the treble, a 25 mm compression driver loaded by the HDI (High-Definition Imaging) waveguide. The crossover splits the signal between the two drive units at 2.4 kHz. It is the shallowest cabinet in the range, standing 135 mm off the wall.

Key features

• 2-way sealed design, ready to be fixed to a wall
• One 133 mm PolyPlas woofer
• 25 mm compression driver fitted to an HDI waveguide
• Reproduced band from 65 Hz to 40 kHz
• 84 dB sensitivity (2.83 V at 1 m) and a nominal impedance of 6 ohms
• Suggested amplification: no more than 100 W

Technical data

Each loudspeaker measures 250 x 135 x 300 mm (width x depth x height) and weighs 5.8 kg: these figures refer to one unit, not to both. The crossover point is 2.4 kHz. Compared with the Studio 620, which uses the same drive units in a stand-mount reflex cabinet, the 610 starts at 65 Hz rather than 50 Hz and is 105 mm shallower.

Finishes

The Studio 610 comes in the Dark Wood finish. The box contains the two loudspeakers.